Windows 2000 Support

Dialers: ADSL Configuration

1. Click on the Start button, go to Settings, then click on Control Pannel.
   
   
   
   
2. In the Control Panel, double click on Network and Dial-Up Connections.
   
   
   
   
3. Locate the Local Area Connection, and right click on it, then select Properties. If you are unable to see the Local Area Connection icon, refer to your network/lan card for installation instructions.
   
   
   
   
4. Click once on TCP/IP, and then click on the Properties button.
   
   
   
   
5. Then click on the radio button next to Use the Following IP Address, and enter in your static ip (The zero's are to be replaced with your static ip digits). Enter in your subnet mask, 255.255.255.0. Your Default Gateway will be identical to your static ip, but will end with a 1(one). Click the radio button next to Use the Following DNS Addresses, and type in beside Preferred DNS, 209.53.200.2, and type in beside Alternate DNS Server, 209.53.200.3. Click Ok.
   
   
   
   
6. Click OK.
   
   
   
   
7. Thats it! Your now setup for ADSL, you can try out your new high speed connection by opening up Internet Explorer and opening our website, www.aebc.com.

	Copyright © 1989-2001 AEBC Internet Corp. All rights reserved. Contact Tony Lum with questions or comments about this site.